DIAMOND FINISH 2 PACK GLOSS CLEARCOAT SYSTEM 2K URETHANE 220 ML

Diamond Finish 2K Gloss Clearcoat System 220ml (Polyurethane)

Achieve a stunning wet-look finish with this professional 2-component (2K) polyurethane clearcoat system, perfect for scale models.

Pack contents:

• 100ml Diamond Finish Clear Coat (high solid)

• 60ml Hardener

• 60ml Thinner

• Instructions

Mixing ratio:
100 parts clear : 50 parts hardener + 10% thinner
Example: 20ml clear + 10ml hardener + 3ml thinner.

Drying times at 20°C:

• Dust free: 30 mins

• Tack free: 10–12 hours

• Fully cured: 48 hours

• Polishable after 12 hours

Important:
Mix only what you need. Once mixed, the chemical reaction starts and hardens within 15–20 minutes. Do not store mixed product.

Safe over decals:
Tested on major brands like Tamiya, Aoshima, Cartograf. Always apply light mist coats over decals before wet coats. Test homemade inkjet decals first.

Safe over paints:
Safe on most paints (acrylic, Tamiya TS) once fully dry. Test first.

Cleaning:
Use Airbrush Cleaner, Cellulose Thinners, Basecoat Thinners, or 2K Thinners. Airbrush Cleaner is specially designed and cost-effective.

• Add to wishlist
• Tell a friend
• Questions about this product?

• 1